Estimation of Staute from Toe Lengths: An Evaluation of the Hausa Population in Nigeria Using Linear Modeling.

Background: Statue determination has remained a basic requirement in determining human identity and ethnicity. Usually in situations when whole anatomical structures are unavailable, forensic expert would be expected to rely on smaller structures such as the phalanges, patella ribs and other fragmentary bones. Aim: The present study evaluates toe anthropometry and its usability as predictors of the stature of the Hausa ethnic group in Nigeria. Methods: Six hundred and sixty four (664) subjects comprising of equal percentage of adult males and females were included in the study group. Toe lengths of both feet (coded as big toe or first toe [1T] to the fifth toes [5T]) were measured using a digital Vernier calliper with accuracy of 0.01mm while stature was taken using a stadiometer with accuracy of 0.1m. SPSS (IBM®) t-test was to evaluate gender difference in the measured dimensions; while SPSS and XLSTAT (2015) Automatic & Generalized Linear Modelling were used to determine the predictability of stature from the toe lengths. The significance level was set at 95% as P≤0.05 was considered significant. Results: The automatic (multiple) regression analysis showed that the males displayed significantly higher mean values than the females for all measured parameters (P<0.001). The general population regression formulae were derived and only three (3) variables (R2T, R5T and L3T) significant contributors to the models for stature prediction for the general Gp (R2=0.385, F[3, 660]=137.68, P<0.001) and female F (R2=0.137, F[3, 328]=17.367, P<0.001) population, while only the L.1T could predict male M stature (R2=0.139, F[1, 330] = 54.489, P<0.001). Single regression gender-specific formulae were derived for the measurements that provided significant R2 values. Conclusion: This study suggested that estimation of a stature of Hausa ethnic group could be made possible by using specific toe measurements. However, lengths of toe may not be so reliable in the estimation of stature, but could be used for sex discrimination in forensic investigation.

Estimation of Stature from Hand and Foot Dimensions of Annang Indigene of Akwa Ibom State, Nigeria.

Background: Stature is a significant anthropometric determinant of the physical identity of an individual. Aim: This study was carried out to estimate stature of Nigerian Annang indigenes of Akwa Ibom State from hand and foot dimensions. Methods: Two hundred (200) adults Annang indigenes (100 male and female each) were randomly selected for this study. Hand and foot dimensions were obtained by direct linear measurements using a 150mm digital vernier caliper (with accuracy of 0.01mm); while stature was determined by stadiometric measurement of the height (to the nearest 0.1m). Measurements obtained include; second (2D), fourth digit (4D) and right foot length (RFL). All measurement were converted to centimeters (cm). SPSS (IBM® version 20, Armonk, New York, USA) t-test was to evaluate gender difference in the measured dimensions; while Pearson’s correlation and Generalized Linear Modeling were used to derive Regression equation for estimation of stature from the measured dimensions. The significance level was set at 95% as P≤0.05 was considered significant. Results: The t-test showed that males displayed significantly higher mean values than the females for all measured parameters (P<0.001). Single regression sex specific regression formulae were derived and the result showed that better prediction (r) values were obtained for females F (2D=0.428, 4D=0.430, RFL=0.587; P<0.01) population when compared to males M (2D=0.319, 4D=0.231, RFL=0.456; P<0.05). Conclusion: This study suggests the existence of sexual difference in hand and foot dimension and also the possibility of accurately estimating stature from the right foot length, right second and fourth digit.

Estimation of stature from hand and foot dimensions of annang indigene of Akwa Ibom State, Nigeria

Background: Stature is a significant anthropometric determinant of the physical identity of an individual. Aim: This study was carried out to estimate stature of Nigerian Annang indigenes of Akwa Ibom State from hand and foot dimensions. Methods: Two hundred (200) adults Annang indigenes (100male and female each) were randomly selected for this study. Hand and foot dimensions were obtained by direct linear measurements using a 150mm digital vernier caliper (with accuracy of 0.01mm); while stature was determined by stadiometric measurement of the height (to the nearest 0.1m). Measurements obtained include; second (2D), fourth digit (4D) and right foot length (RFL). All measurement were converted to centimeters (cm). SPSS (IBM® version 20, Armonk, New York, USA) t-test was to evaluate gender difference in the measured dimensions; while Pearson's correlation and Generalized Linear Modeling were used to derive Regression equation for estimation of stature from the measured dimensions. The significance level was set at 95% as P≤0.05 was considered significant. Results: The t-test showed that males displayed significantly higher mean values than the females for all measured parameters (P<0.001). Single regression sex specific regression formulae were derived and the result showed that better prediction (r) values were obtained for females F (2D=0.428, 4D=0.430, RFL=0.587; P<0.01) population when compared to males M (2D=0.319, 4D=0.231, RFL=0.456 P<0.05). Conclusion: This study suggests the existence of sexual difference in hand and foot dimension and also the possibility of accurately estimating stature from the right foot length, right second and fourth digit

Estimation of staute from toe lengths: an evaluation of the Hausa population in Nigeria using linear modeling

Background: Statue determination has remained a basic requirement in determining human identity and ethnicity. Usually in situations when whole anatomical structures are unavailable, forensic expert would be expected to rely on smaller structures such as the phalanges, patella ribs and other fragmentary bones. Aim: The present study evaluates toe anthropometry and its usability as predictors of the stature of the Hausa ethnic group in Nigeria. Methods: Six hundred and sixty four (664) subjects comprising of equal percentage of adult males and females were included in the study group. Toe lengths of both feet (coded as big toe or first toe [1T] to the fifth toes [5T]) were measured using a digital Vernier calliper with accuracy of 0.01mm while stature was taken using a stadiometer with accuracy of 0.1m. SPSS (IBM®) t-test was to evaluate gender difference in the measured dimensions; while SPSS and XLSTAT (2015) Automatic & Generalized Linear Modelling were used to determine the predictability of stature from the toe lengths. The significance level was set at 95% as P ≤ 0.05 was considered significant. Results: The automatic (multiple) regression analysis showed that the males displayed significantly higher mean values than the females for all measured parameters (P<0.001). The general population regression formulae were derived and only three (3) variables (R2T, R5T and L3T) significant contributors to the models for stature prediction for the general Gp (R2=0.385, F[3, 660]=137.68, P<0.001) and female F (R2=0.137, F[3, 328]=17.367, P<0.001) population, while only the L.1T could predict male M stature (R2=0.139, F[1, 330] = 54.489, P<0.001). Single regression gender-specific formulae were derived for the measurements that provided significant R2 values. Conclusion: This study suggested that estimation of a stature of Hausa ethnic group could be made possible by using specific toe measurements. However, lengths of toe may not be so reliable in the estimation of stature, but could be used for sex discrimination in forensic investigation

Radiologic assessment of angular wrist parameters of asymptomatic Nigerians

Background: Radiographic techniques has availed anatomists the opportunity to study human bony structure in-vivo. Normative data can assist in defining and quantifying abnormalities. This study was carried out to establish normal angular wrist dimensions of adult Nigerians. Methods: A total of 100 standard lateral wrist x-rays were obtained from 50 (26 males [52%] and 24 females [48%]) adult Nigerians. Three (3) angular dimensions; radial tilt, capitolunate angle, and scapholunate angle were measured. Data were analysed using XLSTAT (Addinsoft Version 2015.4.01.21575). Student and paired sample t-test were used to evaluate sex, and side differences respectively. P<0.05 (at 95% confidence level) was taken to be significant. Results: The mean values for the measured angular parameters were as follows; right and left radial tilt (R&L-RT) = 14.06 ± 2.46º, capitolunate angle (CLA)[R=17.48 ± 1.72º, L=17.67 ± 1.67º] and scapholunate angle(SLA) [R=43.70 ± 3.60º, L=45.10 ± 3.44º]. The radial tilt was observed to be identical in the left and right wrists, while the capitolunate and scapholunate angle were observed to be asymmetrical, with the left significantly greater than the right (P<0.01). All right and left wrist parameters were significant inter-predictors (r>0.75; P<0.01), while only the R & L-RT correlated with R-CLA (r>0.302; P<0.033) and L-CLA (r>0.347; P<0.013). Conclusion: It could be concluded that there was no sex difference in angular wrist parameters and asym metry was observed. The variation in the arrangement of wrist bones in both hands could be associated with mechanical impact as a result of use and this must be taken into consideration when evaluating unilateral wrist diseases